Tall Risers – „Museumshafen“ Hafencity Hamburg, 2013 on Flickr.

Slightly cropped for composition. I experiemnced some fogging on some images on this roll because of a broken insert. Seems to be a common problem with the newer „E“ inserts, where the little disks, which secure the flaps (to remove/change film & take-up spool) in the film magazine are made of very thin plastic and break easily. When advancing the film, the roll on the take-up-spool might push out the flap a little bit and create a light-leak. Had to learn the hard way, my most recent acquirement of an insert again showed the same problem, had to send it back. I might try to replace one of the broken flaps with some from a 220 insert but getting it disassembled and put together seems to be not that easy. Anyone having some documentation on the ETR(S)-inserts make-up??

Zenza Bronica ETRSi (645) 2.8/75 PE on Agfapan APX 25 (expired 07/1993) shot @20 developed in Rodinal 1:25 (6min+2min (due to age of film) first 30 sec. cont. agitations, then every 30 sec. 5 times)